hydraulic shear
英 [haɪˈdrɒlɪk ʃɪə(r)]
美 [haɪˈdrɔːlɪk ʃɪr]
n. 液压剪床；（伐木）液压剪
双语例句
- The billets are straightened by the withdrawal straightener, and transported to the flame cutter or hydraulic shear through the pre-cutting roller table.
铸坯经拉矫机矫直成直坯后，由切前辊道把铸坯送入火焰切割机。 - Faulty Analysis and Improvements for Hydraulic System of Hot Static Shear in Heavy Plate Mill
冶金轧机宽厚板热分切剪液压系统运行中的故障分析与改进措施 - Analysis of Lateral Thrust on Main Cylinder Rod of Hydraulic Swing Beam Shear on the Basis of Finite Element Analysis hoel of piston crown
液压摆式剪板机主油缸活塞杆侧推力有限元分析 - It was known from X-ray diffraction analysis that the different shaped spinnerets, with different hydraulic diameters, exerted different shear actions on the pitch melt during the spinning.
X-射线衍射分析结果表明，不同形状的喷丝板因其不同的当量直径，在纺丝时对熔体产生不同的剪切作用； - Police seized a hydraulic shear, self-made T-shaped picklock group, a silver dagger.
警方当场缴获液压剪一把、自制T字形撬锁工具一批，银色匕首一把。 - The finite element stress calculation of the hydraulic rocking shear stand has been described, and the optimization has been carried on in two aspects of force condition and configuration.
介绍液压摆式剪切机机架的有限元应力计算，从受力状态和结构两方面进行优化。 - The main path of ultrasonic sludge disintegration was the mechanical effect of hydraulic shear force.
超声限免污泥的主要作用途径是水力剪切力的机械作用。 - The hydraulic shear for square stainless steel billet designed by our company for caster is introduced, its type selection, structure and shear stress calculation are analyzed.
介绍了邢台机械轧辊（集团）有限公司设计的连铸机用不锈钢矩形坯液压平剪，对该液压剪的选型、剪力计算进行了分析。 - Design of blade carrier of plate rotary shear has been introduced by analysis of moving mechanism of hydraulic plate shear.
通过分析液压剪板机剪切机理，介绍了剪板机刀架总成的设计。 - Pointing to the problem of big pressure at the time of empty load and go down of hydraulic scrap shear stand, consider the pressure reducing of balance valve is important factor to influence power property of differential loop.
针对液压废钢剪剪台空载下行时压力大的问题，分析认为平衡阀的压降是影响差动回路功率特性的主要因素。 - The Cooling System Modification of the Imported Hydraulic Shear
进口液压剪冷却系统改造 - Analysis on the Common Faults of the Hydraulic Shear
液压剪常见事故分析 - Approach to Characteristics of Hole Hydraulic Pressure in Three-Axle Shear Test
三轴剪切试验中孔隙水压力的特性探讨 - Analysis and Calculation about Hydraulic Circuit and Shear Cylinder of Baogang Wide and Heavy Plate Mill Test Piece Shear
宝钢宽厚板试样剪液压回路及剪切缸剪切能力分析计算 - Summarization was made on key factors affecting the formation of aerobic granular sludge, such as influent substrate, COD loading rate, hydraulic shear and DO concentration, selective pressure, temperature, pH, alkalinity, seeding sludge, and type of reactor, etc.
综述了影响好氧颗粒污泥形成的几个关键因素，如进水底物、COD负荷、水力剪切力和溶解氧浓度、选择压、温度、pH值和碱度等，并详述了相关应用研究进展。 - Improvement of Balance Valve of Hydraulic Scrap Shear
液压废钢剪平衡阀的改进 - Study on the Improvement of the Hydraulic Pressure Shear
液压剪切机的改进研究 - Design of hydraulic shear for square stainless steel billet
不锈钢矩形坯液压剪的设计 - For the embankment constructed on soft clayey subsoil, the soft clay generally has large void ratio, high water content, high compressibility, low hydraulic conductivity, low shear strength.
软黏土地基由于其含水量高、孔隙比大、强度低、渗透性差，因此，在灵敏度很高的软黏土地基上建造高度较高的路堤，其稳定性很难得到保证。 - Method of Blade Adjustment for Hydraulic Rotary Shear
液压摆式剪板机刀片调整方法 - Cut-off Control of the Hydraulic Flying-Cut machine Shear flocculation
液压飞剪机的剪切控制 - Restoration of Imported Hydraulic Shear Piston Rod
进口液压剪的活塞杆修复 - The Engineering Properties of MSW are research by the conventional soil tests, such as unit weight, moisture content, the specific weight, hydraulic conductivity, compressibility and shear strength.
使用土工试验方法，对垃圾土的基本性质指标进行了研究，包括容重、含水量、比重、有机物含量、渗透系数、压缩性和剪切强度等性质指标。 - Design of the light-duty hydraulic plate shear drived by double hydrocylinders
双缸轻型液压剪板机的设计 - Also the characteristics of the hydraulic circuit of the main shear cylinder has been analyzed, and the shearing capacity of the main shear cylinder has been checked.
着重对主剪切缸液压回路特点进行了分析，对主剪切缸剪切能力进行了详细校核。 - In order to perfect the Hydraulic Rolling-Cut Shear, we should have to research the control of the hydraulic system deeply.
因此为了能使的液压滚切剪技术更完善，使它在中厚板生产线上发挥更大的作用，我们需要对其液压控制系统进行深入研究。 - The Hydraulic Rolling-Cut Shear is a new type which was development by ourselves. It uses hydraulic cylinder to control the shear trace of upper blade basing on the theory of rolling-cut. The weight is reduced by half comparing with The Rolling-Cut Shear.
液压滚切剪是完全自主研发制造的新型滚切剪，它是采用液压缸控制上剪刃的滚动剪切轨迹来实现滚动剪切原理，优点是其本体重量大约是机械滚切剪的一半。